研究業績‎ > ‎

2022年度

2021年度<<

受賞

  1. Masaki Sano, Hiroki Nishikawa, Xiangbo Kong, Hiroyuki Tomiyama, Tongxin Yang, Tomoaki Ukezono, Toshinori Sato, Best Paper Award, International Symposium on Advanced Technologies and Applications in the Internet of Things (ATAIT), August 25, 2022.

論文誌

  1. Hiroki Nishikawa, Kana Shimada, Ittetsu Taniguchi, Hiroyuki Tomiyama, "Mouldable Fork-Join Task Scheduling Techniques with Inter and Intra-Task Communications," International Journal of Embedded Systems, Inderscience Publishers, vol. 15, no. 1, pp. 69-81, April 2022. [Download]
  2. Chiharu Shiro, Hiroki Nishikawa, Xiangbo Kong, Hiroyuki Tomiyama, Shigeru Yamashita, "Minimization of MEDA Biochip-Size in Droplet Routing," Biosensors, MDPI, vol. 12, no. 5, article 277, May 2022. [Download]
  3. Hengyi Li, Xuebin Yue, Zhichen Wang, Zhilei Chai, Wenwen Wang, Hiroyuki Tomiyama, Lin Meng, "Optimizing the Deep Neural Networks by Layer-wise Refined Pruning and the Acceleration on FPGA," Computational Intelligence and Neuroscience, Hindawi, vol. 2022, article 8039281, June 2022. [Download]
  4. Koyu Ohata, Hiroki Nishikawa, Xiangbo Kong, Hiroyuki Tomiyama, "ILP-based and Heuristic Scheduling Techniques for Variable-Cycle Approximate Functional Units in High-Level Synthesis," Computers, MDPI, vol. 11, no. 10, article 146, October 2022. [Download]
  5. Hengyi Li, Zhichen Wang, Xuebin Yue, Wenwen Wang, Hiroyuki Tomiyama, Lin Meng, "An Architecture-level Analysis on Deep Learning Models for Low-Impact Computations," Accepted for publication in Artificial Intelligence Review, Springer. [Download]

国際会議

  1. Tomoki Shimizu, Hiroki Nishikawa, Xiangbo Kong and Hiroyuki Tomiyama, "A Fair-Policy Dynamic Scheduling Algorithm for Moldable Gang Tasks on Multicores," In Proc. of Mediterranean Conference on Embedded Computing (MECO), pp. 172-175, Budva, Montenegro, June 2022.
  2. Yuho Toku, Hiroki Nishikawa, Xiangbo Kong and Hiroyuki Tomiyama, "Container-based Throughput Balancing for Multiple Streaming Applications: A Case Study," In Proc. of Mediterranean Conference on Embedded Computing (MECO), pp. 199-202, Budva, Montenegro, June 2022.
  3. Hiroki Matsumiya, Xiangbo Kong, Ami Tanaka, Hiroki Nishikawa, Hiroyuki Tomiyama, "A Case Study on Forehand Footwork Mistake Detection in Table Tennis," In Proc. of International Symposium on Advanced Technologies and Applications in the Internet of Things (ATAIT), pp. 7-16, Ibaraki, Osaka, August 2022.
  4. Mao Nishira, Hiroki Nishikawa, Xiangbo Kong, Hiroyuki Tomiyama, "Delivery Drone Routing under Load dependent Flight Speed based on Integer Quadratic Programming," In Proc. of International Symposium on Advanced Technologies and Applications in the Internet of Things (ATAIT), pp. 35-42, Ibaraki, Osaka, August 2022.
  5. Tomoyasu Shimada, Hiroki Nishikawa, Xiangbo Kong, Hiroyuki Tomiyama, "Monocular Thermal Camera Depth Estimation with Optical Flow for Autonomous Drones," In Proc. of International Symposium on Advanced Technologies and Applications in the Internet of Things (ATAIT), pp. 43-52, Ibaraki, Osaka, August 2022.
  6. Koyu Ohata, Hiroki Nishikawa, Xiangbo Kong, Hiroyuki Tomiyama, "A Heuristic Scheduling Algorithm with Variable Cycle Approximate Functional Units in High Level Synthesis," In Proc. of International Symposium on Advanced Technologies and Applications in the Internet of Things (ATAIT), pp. 53-59, Ibaraki, Osaka, August 2022.
  7. Masaki Sano, Hiroki Nishikawa, Xiangbo Kong, Hiroyuki Tomiyama, Tongxin Yang, Tomoaki Ukezono, Toshinori Sato, "An Accuracy Controllable Approximate Adder for FPGAs," In Proc. of International Symposium on Advanced Technologies and Applications in the Internet of Things (ATAIT), pp. 60-66, Ibaraki, Osaka, August 2022. (Best Paper Award)
  8. Yilin Zhao, Qidi Zhang, Hiroki Nishikawa, Xiangbo Kong, Hiroyuki Tomiyama, "Evaluation of Power Analysis Attack Resistance of Masked Adders on FPGA," In Proc. of International Symposium on Advanced Technologies and Applications in the Internet of Things (ATAIT), pp. 67-74, Ibaraki, Osaka, August 2022.
  9. Tomoyasu Shimada, Hiroki Nishikawa, Xiangbo Kong, Hiroyuki Tomiyama, "Monocular Depth Estimation with Optical Flow Attention for Autonomous Drones," Accepted for publication at International SoC Design Conference (ISOCC), Gangneung, Korea, October 2022.
  10. Wanyin Shi, Hiroki Matsumiya, Hiroki Nishikawa, Xiangbo Kong, Hiroyuki Tomiyama, "Fusing Infrared and Visible Images for DNN-based Nighttime Human Detection," Accepted for publication at International SoC Design Conference (ISOCC), Gangneung, Korea, October 2022.
  11. Masataka Hirai, Shigeru Yamashita, Sudip Roy, Hiroyuki Tomiyama, "Binding and Scheduling of 2×3 Mixers for Transport-Free Sample Preparation Using Programmable Microfluidic Devices," Accepted for publication at Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), Hirosaki, August 2022.
  12. Takuya Ando, Iori Muguruma, Yugo Ishii, Nagisa Ishiura, Hiroyuki Tomiyama, Hiroyuki Kanbara, "Full Hardware Implementation of RTOS-Based Systems Using General High-Level Synthesizer," Accepted for publication at Workshop on Synthesis And System Integration of Mixed Information technologies (SASIMI), Hirosaki, August 2022.
  13. Eiji Sugahara, Hiroki Nishikawa, Xiangbo Kong, Hiroyuki Tomiyama, "Energy Consumption Reduction through Resource Allocation Using Docker," Accepted for poster presentation at International Workshop on Advances in Networking and Computing (WANC) in conjunction with International Symposium on Computing and Networking (CANDAR), Himeji, November 2022.

国内学会

  1. 清水智貴, 西川広記, 孔祥博, 冨山宏之, "Fair方式に基づくMoldable Gangタスクの動的スケジューリングアルゴリズム," 回路とシステムワークショップ, pp. 253-254, 北九州, 2022年8月.
  2. 南口比呂, 石浦菜岐佐, 冨山宏之, 神原弘之, "RTOS利用システムのフルハードウェア化における管理ハードウェアの自動生成," 情報処理学会DAシンポジウム, 鳥羽, 2022年8月.
  3. 志摩和毅, 西川広記, 孔祥博, 冨山宏之, "RISC-Vプロセッサへの乱数生成命令の追加, 組込みシステム技術に関するサマーワークショップ, インタクティブセッション, 下呂, 2022年9月.
  4. 西羅真央, 西川広記, 孔祥博, 冨山宏之, "荷重により速度が変化する荷物配送ドローンの経路計画問題に対する整数計画法, 組込みシステム技術に関するサマーワークショップ, インタクティブセッション, 下呂, 2022年9月.
  5. 城千春, 森海翔, 西川広記, 孔祥博, 冨山宏之, 山下茂, "MEDAバイオチップにおける形依存の速度モデルを利用した液滴輸送最短問題, 組込みシステム技術に関するサマーワークショップ, インタクティブセッション, 下呂, 2022年9月.